In Windows 10, connecting to a Wi-Fi network is not always as simple as keying in the password and clicking on ‘Connect’. You may face the ‘no Internet, secured’ error in Windows 10, which stops you from accessing the Internet despite the authorized login.
It’s strange how Windows 10 users could face the ‘no Internet, secured’ connection error out of nowhere.
You could have the right password, a trusted Wi-Fi router, strong signal, and even a credible internet provider. And yet, it won’t do any good when you’re stuck with the ‘no Internet, secured’ connection error in Windows 10.
That doesn’t mean that there’s no fix for the ‘no Internet, secured’ error in Windows 10.
Below, you’ll find all the possible solutions to fix this connection issue in Windows 10. But, before that, let’s figure out what ‘no Internet, secured’ error is and how it occurs in Windows 10.
‘No Internet, Secured’ Error – Explained
So, what does ‘no Internet, secured’ error mean in Windows 10? When your Wi-Fi says no Internet, secured , it indicates that two things:
- Access to the Internet is denied
- The established connection is secured
You can break it down and understand the connection between your Wi-Fi router and your system adapter is secure and safe. But, despite this, you are unable to access the Internet.
Such a situation puts you into a pickle. Unplugging and reconnecting the Ethernet cable to the Wi-Fi router won’t solve your problem. You would neither find a fix by resetting your Windows 10 connection settings to default.
The ‘no Internet, secured’ error doesn’t have an easy fix. You first need to understand why the error occurred in your Windows 10 system.
Why Does ‘No Internet, Secured’ Connection Error Occur in Windows 10?
In Windows 10, the Wi-Fi ‘no Internet, secured’ error lets you know that something’s wrong with either a hardware component or the network connections settings.
In most cases, you could fix the ‘no Internet, secured’ error by checking issues with your system’s network adapter and the wireless router. Sometimes, a misconfiguration in the connection settings on Windows 10 can also lead to the ‘no Internet, secured’ error.
There are several ways to fix Windows 10 ‘no Internet, secured’ error and each one is based on solving issues in either of these two factors.
How to Fix ‘No Internet, Secured’ Error in Windows 10
To start off, you can try restarting your PC in Safe Mode to reset your network adapter settings. If that doesn’t work, then work your way through the fixes given below.
1. Get Updates for Your Network Adapter
Your first move would be updating your network adapter. Now, you don’t need to physically replace the network adapter hardware in your Windows 10 system. You can upgrade the outdated network adapter driver and get the ‘no Internet, secured’ error fixed.
To update your network adapter manually,
- Open the Run dialog box (press ‘ Windows ’ + ‘ R ’ key)
- Type “ devmgmt. msc ” in the Open field
- Click on OK or hit the Enter key
- In the Device Manager window, go to the left pane
- Expand the list for Network Adapters
- Select the current network adapter and right-click
- Now, click on the Update Driver option from the drop-down menu
- Then, select the option that says – Search automatically for updated driver software
- Follow the onscreen instructions
- After the installation is complete, reboot your PC
As an alternative, you can run a driver updater tool to get the latest updates for Windows 10 network adapters.
You can also choose to run Windows Update and automatically get upgrades for the network adapter driver. But, we recommend you to manually update the network driver as Windows Update can cause connection problems in Windows 10 .
2. Fix with Network Troubleshooter
If the ‘no Internet, secured’ error shows up even after updating your network adapter, the Troubleshooter may get it fixed. The Network Troubleshooter in Windows 10 can automatically detect the issue and fix the ‘no Internet, secured’ error.
You can simply right-click the internet connection icon on your taskbar’s notification area. Then, click on ‘ Troubleshoot problems ’ from the menu.
There’s a roundabout way to use the Network Troubleshooter and fix the ‘no Internet, secured’ error in Windows 10. You can run a few commands in the Command Prompt interface to manually troubleshoot the issue.
After using the Network Troubleshooter,
- Go to the Start menu and type “ cmd ” in the search box
- Right-click on the Command Prompt program and select ‘ Run as administrator ’ from the menu
- Now, click on Yes in the UAC prompt
- In the Command Prompt window, type the following commands one by one and press Enter after each command-line.
- netsh winsock reset
- netsh int ip reset
- ipconfig /release
- ipconfig /renew
- ipconfig /flushdns
Now, close the Command Prompt window and refresh your network connections to see if the ‘no Internet, secured’ error persists.
3. Make Some Changes in the Network Adapter Settings
Generally, changing the IP configuration of a secured Wi-Fi connection can fix the ‘no Internet, secured’ error in Windows 10. You can go to the Network Adapter Settings of the Wi-Fi connection and disable the IPv6 option.
- Go to the Start menu search box
- Type “ network and sharing ”
- Open the Network and Sharing Center from the results
- In the left side panel, click on Change adapter settings
- Locate the wireless connection and right-click on it
- Select the ‘ Properties ’ option from the menu
- Click ‘ Yes ’ in the UAC prompts
- In the Wi-Fi Properties window, go to the Networking tab
- Here, deselect the Internet Protocol Version 6 (TCP/IPv6) option
- Click on OK to save the changes
- Restart your PC
If you’re unable to fix the ‘no Internet, secured’ error with this, then undo these changes.
4. Turn Off All Wi-Fi Sharing Apps
There are programs and apps that use Wi-Fi sharing features of your network adapter to connect and transfer data. You can choose to temporarily disable such software.
To disable Wi-Fi sharing for apps,
- Go to the Start menu search box
- Type “ network and sharing ”
- Open the Network and Sharing Center from the results
- In the left side panel, click on Change adapter settings
- Locate the wireless connection and right-click on it
- Select the ‘ Properties ’ option from the menu
- Go to the Sharing tab
- Uncheck all Wi-Fi sharing items, including ‘ Microsoft network adapter multiplexor protocol ’
- Click on OK to save the changes and exit
- Restart your PC
When you turn off the Wi-Fi sharing for Windows 10 apps, the wireless router doesn’t conflict with your network adapter driver. As a result, you don’t face the ‘no Internet, secured’ error.
5. Enable NetBIOS over TCP/IP
You could face the ‘no Internet, secure’ error in Windows 10 after installing system updates. Particularly after the Windows 10 Fall Creators Update, many users have faced several network problems – including the ‘no Internet, secure’ error.
To fix the ‘no Internet, secure’ error after installing the Windows 10 Creators Update,
- Open the Run dialog box ( Windows + R )
- Type “ ncpa.cpl ” and press the Enter key
- In the Network Connections window, select your current Wi-Fi connection
- Right-click and open the Properties window
- Here, double-click on IPv4
- Put a check on – obtain DNS server automatically
- Put a check on – obtain IP address automatically
- Click on the Advanced button and go to the WINS tab
- Locate the NetBIOS setting section
- Here, select – Enable NetBIOS over TCP/IP
- Click on OK and exit
- Restart your PC and check for internet access
Now, the Internet gets enabled with the IPv4 connectivity and you shouldn’t get the ‘no Internet, secure’ error any longer.
6. Tweak the Power Management Settings
You can also try adjusting the power plan of your Windows 10 PC. This can help your network adapter function properly under balanced power conditions.
- Press the Windows key and X key
- From the menu, click on Device Manager
- Expand the list of network adapters
- Double-tap the wireless network and go to Power Management tab
- Now, deselect the option – allow computer to turn off this device to save power
- Click on OK and restart your PC
Try this out and see if the ‘no Internet, secure’ error in Windows 10 gets fixed.
7. Remove the Network Adapter Manually and Reinstall It
The last option is manually reinstalling the adapter/driver and restarting the network connection afresh.
- Open the Device Manager
- Select the Wi-Fi adapter driver from the list of network adapters
- Right-click on it and click on Uninstall
- Now, select the option – Delete the driver software from this device
- Follow the onscreen instructions to remove the adapter
- Then, click on the Action menu
- Here, select – Scan for Hardware changes
Now, your Windows 10 automatically reinstalls the network adapter. The latest version of the adapter surely doesn’t cause any trouble for you. This could be the ultimate fix for ‘no Internet, secure’ error in Windows 10.
Related Reading: