Windows 10 users must be having a bad day if they’ve recently downloaded the October 2018 update . Much like the previous major update (Fall/Spring Creators Updates), it seems that Microsoft has yet again let down its billions of customers.
The Windows 10 October 2018 update has arrived, sadly bringing along a new range of bugs and technical issues. So, if you haven’t yet upgraded your computer recently, you should keep reading to know more on the Windows 10 October 2018 update problems.
While surfing through the Internet, you’ll come across of dozens of complaints on October 2018 update from Windows 10 users. These complaints are filling up online forums in full speed.
Out of these, we’ve sorted some of the major problems and issues concerning Windows 10 October 2018 update. You’ll understand the critical issues circling around the installation and post-installation of the update. Going along, you’ll also get to know a couple of easy fixes for Windows 10 October 2018 update issues.
All That’s Wrong with Windows 10 October 2018 Update
Firstly, you should know that problems with the October 2018 update are not restricted to installation or compatibility or any other specific category. You’ll find a variety of bugs in the update, during the installation and thereafter.
To broadly classify Windows 10 October 2018 problems, you’ll find issues revolving around –
- Installation of the update
- Hardware compatibility
- System performance
- Features and upgraded configurations
All problems with the Windows 10 October 2018 update have been clubbed up and spread across these four categories after identifying the common grounds.
So, let’s begin declassifying all the major October 2018 update issues, and simultaneously helping out with some proven fixes.
How to Fix Windows 10 October 2018 Update Installation Problems
Before anyone learned about these issues, many Windows 10 users had problems installing the update in the first place. Some encountered reconfiguration problems during the installation, while others weren’t simply able to install the October 2018 update.
Thankfully, fixing the installation issues with this update is pretty simple. The built-in troubleshooter in the Windows Update app is there to help you kick off the installation.
1. Use Troubleshooter
Generally, to download the update, you should go to the Update & Security section in the Settings menu. Here, you click on ‘ Check for Updates ’ and allow Windows 10 to automatically upgrade itself.
However, you may still face trouble installing the update. To fix this, follow the steps below and allow Windows 10 to automatically fix the update installation issues.
- Go to the Start menu
- Click on Settings button (the gear icon)
- In the Settings window, navigate to Update & Security > Troubleshoot
- Now, click on Windows Update
- Then, click on ‘ Run the troubleshooter ’ link
- Here, follow the onscreen instructions
- After the troubleshooting is finished, click on ‘ Apply this fix ’
Now, you can proceed to the ‘Check for Updates’ link and install the update as usual. There’s a good chance that the installation completes properly.
2. Install Error – The update isn’t applicable to your computer
Some users came across a peculiar error message that read – the update isn’t applicable to your computer . For a few instances, this error was thrown up while installing the October 2018 update.
You can fix this installation error by restarting your computer and installing the previous system updates. If you haven’t upgraded your Window 10 for a while, then jumping directly to the October 2018 update may cause the problem.
In the Settings menu, navigate to Update & Security > Windows Update > Update history . Click on the ‘ Update history ’ link, browse through the pending/unfinished updates and install them first.
After that, you restart your PC and follow the steps to click on ‘ Check for Updates ’. Your Windows 10 will install the update properly, this time around. And, you won’t get an error message as such.
3. Fix – Install Doesn’t Finish
You may get real pissed at your PC when the update installation runs smoothly, only to get stuck in the last phase.
At the last moment, you encounter an error saying - We couldn’t complete the updates. Undoing changes. Don’t turn off your computer or Failure configuring Windows Updates. Reverting changes .
To fix this,
- Go to the Settings window from the Start menu
- Click on Update & Security
- Go to Windows Update
- Click on the ‘ Update history ’ link
- Find the pending/unfinished or half-installed updates
- Remove them by clicking on ‘ Uninstall ’
Now, restart your PC and allow it to reconfigure the update changes. Then, go forth and install the Windows 10 October 2018 update again.
Windows 10 October 2018 Update – Repairing the Hardware Issues
It’s not just the update installation issues that have put Windows 10 users down and out. A big reason why people are bummed out with the October 2018 update is that it has critically damaged their system hardware.
1. Audio Mismatch
After you install the update, the first thing that goes out of the window is your audio device. The October 2018 update is incompatible with your audio driver
You’ll be hung up to know that Microsoft’s new update doesn’t gel well with Intel audio drivers. Almost every other Windows computer in the world is equipped with Intel audio drivers.
So, there’s no use of an update that doesn’t match with the default Intel audio driver.
For such a widespread issue, Microsoft acted upon it and immediately induced a software patch to the October 2018 update. Now, when you download it with the Windows Update app, you can get a quick fix by contacting Microsoft Support .
If the problem persists, you can consider replacing your audio driver or uninstalling the October 2018 update .
2. Trouble Tuning up with 6 th Gen Intel Processors
Another major hardware bummer with the October 2018 update – incompatibility with the newest Intel processes. If your Windows 10 system has the Skylake processor (or any other 6 th generation Intel processor), prepare to cook eggs on your CPU.
That’s not exaggerating things. The October 2018 update heats up your CPU like anything, and might as well fry your motherboard chip after long hours of processing. High CPU usage , reduced battery life, and induced instability are the major downers for installing the October 2018 update on your Windows 10 laptop.
And, there’s hardly any fix for such an issue, apart from removing the update altogether.
How to Fix Performance Bugs Brought by October 2018 Update
Performance-wise, the Windows operating system is supposed to get better after each update. That’s certainly not the case for Windows 10 October 2018 update.
Online forums on Windows 10 are overflowing with complaints on how people aren’t even able to run apps after installing the October 2018 update. For some, the update has compromised the security of their system, while others are not able to access websites, file locations, etc.
1. Too Many Blue Screens
If you’re hooked on to Windows 10 for more than a year, you’ll know how it’s a giant headache to come across a ‘Blue Screen of Death’. With this update, the number of Blue Screens popping up on your desktop can increase.
According to reports , an additional patch to the October 2018 update has crashed HP laptops across the globe. People using Windows 10 on HP systems have installed the update only to be stuck with an unending stream of Blue Screens.
The issue comes from some glitch in the keyboard driver. Microsoft plans to bring out a new fix to this update issue soon. Till then, users with Windows 10 HP laptops are advised not to install the update.
2. Broken ISO Files
The update also comes with damaged some core system files. If you try downloading the update using an ISO file, you’ll encounter an error – 0x8007025D – 0x2000C .
This error code indicates that safe installation of the update has failed. To fix it, you’ll need to try out some solutions discussed on Microsoft Support community. The code also means that the October 2018 update is corrupted.
To fix the corrupted ISO file, you can run the Media Creation Tool on Windows 10. Here, you’ll create a bootable USB to repair the ISO file and support further installation of the update.
You can also use third-party tools to repair the update’s ISO file. Then, there’s always the free and effective tool called System File Checker (SFC) on Windows 10. In fact, after installing the October 2018 update, it is better to run an SFC scan to fix any and all files corrupted by the update.
3. Several Files Lost
Corrupted files can be repaired, but you can’t get back deleted files; not without a backup. With the October 2018 update, many users are pissed off for losing their data.
The update has randomly deleted files present in the ‘Documents’ folder. This issue is severe enough to bring down a whole enterprise working on Windows 10 systems.
Deleting important documents is just not acceptable. And, since you hadn’t had a backup, there’s no fix for this issue. Removing the update is also not going to help and restore those files.
4. Hard Drive Issues
Your Windows 10 system has also lost its performance in terms of managing data on the hard drives. If your hard drive has a few bad sectors, then the October 2018 update is only going to make it worse.
Firstly, you won’t be able to properly install the update if the System Reserved partition on your hard drive is brimming or full. On top of that, the update can corrupt your hard drive if it has some weak sectors.
To fix the hard drive issues of October 2018 update,
So, you can give a shot at installing the update after repairing your hard drive. If you haven’t faced any other problems, then this might just work for you.
More Problems with Windows 10 October 2018 Update
The list of Windows 10 October 2018 update issues doesn’t end here. The update goofs up with its features, system configurations, preinstalled apps, and program settings.
So, let’s have a quick look at some issues that come along with this update.
1. Zip File Failures
One potential issue that stuns Windows 10 users is the update’s interference in unzipping archive files. If your system contains zip files, then you may lose them after installing the update.
Due to the update, Windows 10 fails to unzip the files. In the due process, some contents of the zip files are lost. You aren’t able to replace or overwrite these files, and eventually you can’t recover them because they’ve been automatically deleted by the update. Sadly, there’s no fix to this issue.
Related Reading: Top 10 Free WinZip Alternatives to Try in 2018
2. Media Creation Tool Gets Stuck
Microsoft’s handy app – Media Creation Tool – gets stuck while installing the update via USB. After the download comes to a standstill, you can only close and reopen the Media Creation Tool app to resume temporarily.
To fix this issue, you need to instantly unplug the network connection on your Windows PC.
You may also face the ‘DynamicUpdate’ error while using Media Creation Tool to install the update. To fix this, navigate to the following address –
C:\$Windows.~WS\Sources\Windows\sources
Here, find the setupprep.exe file and launch it. Now, go back and try installing the update from Media Creation Tool again.
3. Connection Issues - 0x800F0922 Error
If you come across an error with the code – 0x800F0922, the update is having trouble with your VPN connection. At this stage, your active VPN connection is meddling with the Windows 10 update servers .
To fix this, simply disconnect the VPN server and try running the update again.
4. Apps Stop Working
Edge (web browser) is the first app to stop working after the update. Microsoft’s own internet explorer finds trouble with the October 2018 update. Edge is unable to load pages and asks you to enable IPv6.
To fix Edge after the October 2018 update,
- Go to Settings menu
- Click on Networking & Internet
- Go to Network and Sharing Center
- Click on Change adapter settings link from the left panel
- Select the network adapter and click on Properties tab
- Now, open the Networking tab in the Properties window
- Put a check for – Internet Version 6 (TCP/IPv6)
- Click on OK to save changes
Besides Edge, other apps that face trouble after the October 2018 update include –
- Microsoft Store – loses connectivity
- Mozilla – syncing disabled
- File Explorer – visual glitches due to dark theme
- Mailing apps
- File sharing apps – Bluetooth disabled
To round up things, there aren’t any absolute fixes to solve the Windows 10 October 2018 update. So, your only way out is to either reset the Windows 10 October 2018 update, or avoid it completely.
Steps to Reset Windows 10 October 2018 Update
You may experience more problems as you go along using Windows 10 with the October 2018 update. That’s why, you can consider resetting the update to fix some common issues.
To reset Windows 10 October 2018 update,
- Go to the Start menu search box and click on ‘ cmd ’
- Right-click on ‘ Command Prompt ’ program and select ‘ Run as admin ’ from the menu
- In the Command Prompt window, type the following commands and press the Enter key after each command-line
net stop wuauserv net stop bits net stop cryptsvc Ren %systemroot%\SoftwareDistribution\SoftwareDistribution.bak Ren %systemroot%\system32\catroot2 catroot2.bak net start wuauserv net start bits net start cryptsvc
- Restart your Windows 10 thereafter, and try installing the Windows 10 October 2018 update again.
How to Block/Uninstall Windows 10 October 2018 Update
There’s no doubt that uninstalling or avoiding the Windows 10 October 2018 update is the safest way to protect your PC. Currently, if you haven’t installed the update, you can choose to block it till further notice from developers at Microsoft.
If you’ve installed the Windows 10 October 2018 update, then follow the steps below to uninstall it right away.
- Go to the Settings window from the Start menu
- Click on Update & Security
- Go to Windows Update
- Click on the ‘ Update history ’ link
- Select the October 2018 updates and right-click on them
- Click on ‘ Uninstall ’ and remove each one of them
- Restart your PC to reconfigure the update changes
You can also rollback Windows 10 to an earlier state.
- Type ‘ system restore ’ in the search box
- Click on ‘ Create a restore point ’
- System Properties dialog window opens up
- Go to System Protection tab
- Click on Configure
- Enable – Turn on system protection
- Set the Max Usage limit between 5% to 10%
- Click on Apply and OK
- Now, go to System Restore tab
- Click on Next
- Allow Windows 10 to boot up and resume normally
This way, you’ve successfully scaled down your Windows 10 to an earlier version – the one without the October 2018 update.
An Honest Advice
You won’t find any reason as to why the October 2018 update is good for your Windows 10. So, our last word for you is – avoid installing the update.
You may have to wait for a couple of weeks or days for Microsoft to fix the Windows 10 October 2018 update. Till then, your PC will be safe without it.
Over the past two years, you’ve learned how Windows 10 is facing troubles due to updates. It is a wakeup call for Microsoft to dig deep into its update quality control measures.
Despite the extensive pre-release trials and global test runs, new Windows 10 updates continue to leave the users all torn up.
Let’s hope the next update doesn’t shoot down our expectations, and tunes up Windows 10 instead of stringing it out.